CALL US ANY TIME OR GET A FREE QUOTE            NSW, VIC, SA, QLD, WA, TAS, NT, ACT

Categories

 
Sentor Monitoring & Control Systems i7000 Controller

Sentor Monitoring & Control Systems i7000 Controller

SEN/I7000

Short Description :

10 days
Or give us a call on
1300 266 682

This product is electronically distributed.

Sentor Monitoring & Control Systems i7000 Controller

                                                     Sentor i7000

The i7000 is an excellent high-performance single board computer based on Texas Instruments’ 1GHz Sitara AM3358 ARM Cortex-A8 processor. It is driven by a tiny CPU Module which has integrated AM3358 processor, DDR3, Nand Flash and brought out most of the features and signals of the AM3358 CPU through expansion pins. The CPU Module is in combination with a carrier board to extend and provide more features through headers and connectors.

Website: www.sentor.com 

 

                                 i7000board

Main Board Parameters

  • Dimensions: 96 mm x 96 mm (6 layer PCB design)
  • Input Voltage: +12V
  • Temperature Range: 0~70 Celsius
  • Humidity Range: 20% ~ 90%

 

Memory

  • 2*256MByte DDR3 SDRAM
  • 512MByte NAND Flash

 

Audio/Video Interfaces

  • An Audio input interface (3.5mm audio jack)
  • A two-channel audio output interface (3.5mm audio jack)
  • A TFT LCD interface / 4 line Resistive Touch Screen interface (50pin FPC connector)

Processor

  • TI AM3358 ARM Cortex-A8 microprocessor
  • 1GHz ARM Cortex-A8 32-bit RISC MPU
  • NEON™ SIMD Coprocessor
  • 32KB/32KB of L1 Instruction/Data Cache with Single-Error Detection (parity)
  • 256KB of L2 Cache with Error Correcting Code (ECC)
  • SGX530 Graphics Engine
  • Programmable Real-Time Unit Subsystem

 

Input Interfaces and Other Facilities

  • One RESET button
  • Two User buttons (MENU and BACK)
  • One Power indicator
  • Two User LEDs
  • One Buzzer

 

Data Transfer Interfaces

  • Serial port:

o    1 x 3 line Debug serial port, RS232 voltage (UART0 brings out by DB9 connector)

o    1 x 3 line serial ports, RS232 voltage (UART2 brings out by DB9 connector)

o    3 x 3 line serial port, TTL voltage (UART3/4/5 brings out by J6 and J7 2.54mm pitch 2*5-pin expansion connectors)

  • USB ports:

o    2 x USB2.0 Host ports with Integrated PHY (High-speed, 480Mbps, USB-A Type)

o    1 x USB2.0 OTG port with Integrated PHY (High-speed, 480Mbps, Mini-USB Type)

  • TF card slot
  • 2 x Ethernet: 10/100/1000 Mbps, RJ45 connector (only one Ethernet supported in WinCE)
  • 1 x CAN2.0 interface (brings out by 8-pin Phoenix Connector)
  • 1 x RS485 interface (brings out by 8-pin Phoenix Connector)
  • GPMC Bus interface

 

Expansion Interfaces and Signals Routed to Pins

  • Two 0.4mm space 2*40-pin board-to-board male expansion connectors
  • TFT LCD Interface (support 24-bpp parallel RGB Interface LCD)
  • Two USB 2.0 OTG Ports With Integrated PHY, High-Speed
  • Three inter-integrated circuit (I2C) Bus interfaces
  • Six UART interfaces;
  • One SPI interface;
  • Two 10/100/1000 Mb/s Ethernet MAC (EMAC) with Management Data Input/Output
    (MDIO) module;
  • A multichannel audio serial ports (McASP);
  • 8-channel 12-bit ADC interfaces;
  • Two 4-line SD/MMC card interfaces;
  • GPMC bus

          i7000Banner